Web Analytics Made Easy -
StatCounter

Professional Reticle Leveling System Wheeler Engineering

Shop for Low Price Professional Reticle Leveling System Wheeler Engineering .Compare Price and Options of Professional Reticle Leveling System Wheeler Engineering from variety stores in usa. products sale.

"Today, if you do not want to disappoint, Check price before the Price Up.Professional Reticle Leveling System Wheeler Engineering You will not regret if check price." price comparisons Professional Reticle Leveling System Wheeler Engineering

Content:

Professional Reticle Leveling System Wheeler Engineering.

$39.99
Professional Retical Leveling System: The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope ...

Product Description

Professional Retical Leveling System:  The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own.

 The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.

Glock 42/43 Adapter Kit Mgw.

$33.33
Glock 42/43 Adapter Kit fits the MGW309 and MGW309S Sight Movers to fit the compact Glock 42 and 43 pistols. The ...

Product Description

Glock 42/43 Adapter Kit fits the MGW309 and MGW309S Sight Movers to fit the compact Glock 42 and 43 pistols.  The adapter kit includes the adapter spacer and the shoe.

Does not include sight pusher body


Big Book Catalog, Issue:71, Page:477

Universal Sight Mounting Fixture & Components Forster.

$2.99 - $364.99
The Foster Scope Mounting Jig fills the exacting requirements of the most particular gunsmith. Will handle virtually all bolt action, lever action and ...

Product Description

The Accurate, Professional Way To Mount Scopes & Sights

The Foster Scope Mounting Jig fills the exacting requirements of the most particular gunsmith. Will handle virtually all bolt action, lever action and pump guns! You have only to spoil one good gun with a faulty job and you've spent the price of the jig. We have sold a great number of these to gunsmiths during the recent years. The universal comment when we meet scope jig buyers later is "I don't know how I ever did business without it. Would rather almost do without my right arm than lose it now!"

The Forster Universal Sight Mounting Fixture was designed to fill the exacting requirements encountered in drilling and tapping holes for the mounting of scope mounts, receiver sights, shotgun beads, etc. The Fixture will handle virtually all bolt action, lever action and pump action guns including the Savage 99, Remington 760, etc.; in fact, any single barrel gun as long as the barrel can be laid into the "V" blocks of the Fixture. Tubular magazine guns are done in the same manner by first removing the magazine tube.

The Fixture will locate the holes to a standard, predetermined spacing built into the over-arm, or to any other spacing by sliding the over-arm in either direction. "Run out" of the drill is eliminated as it is guided through a hardened and ground drill bushing. Tapping is done through another bushing of the correct tap size, and eliminates cocking of the tap which is a major cause of tap breakage and sloppy holes. The sliding over-arm has three holes with standard spacing of .500" and .860" between centers into which the interchangeable drill and tap guide-bushings fit. The over-arm is keyed and slides in a "T" slot. It is always in true alignment with the exact center of the gun barrel.

The main body of the Fixture is cast aluminum. The two "V" blocks are adjustable for height and made of hardened steel accurately ground on the "V" as well as the shaft. Accuracy in every detail has been the first consideration!

It is truly a precision fixture that will save its cost over and over again while allowing you to do a really first class job on every gun that comes into your shop.


Big Book Catalog, Issue:71, Page:459
Big Book Catalog, Issue:71, Page:469
SPEC: Approx. 20" (50.8cm) long. Comes complete with Drill and Tap Bushing Set for 6-48. Other bushings sold below.

Vertical Reticle Instrument Exd Engineering.

$57.99
Adjustable, self-aligning V-blocks with integral spirit level makes zeroing your scope faster and far more accurate. Enhances final scope accuracy by squaring ...

Product Description

Accurate Check For Perfectly Aligned Scope Crosshairs

Adjustable, self-aligning V-blocks with integral spirit level makes zeroing your scope faster and far more accurate. Enhances final scope accuracy by squaring the crosshairs to the bore. Even a slight cant of the crosshairs can reduce overall accuracy, change point of impact and increase the likelihood of missed "bulls" or wounded game.


Big Book Catalog, Issue:71, Page:459
SPECS: Aluminum, anodized finish, black. 5-1/2" (14cm) long, 2" (5cm) wide. Includes complete instructions.

Leupold Torx Screws Brownells.

$9.99 - $20.99
Refill your Leupold factory screw kit or keep these extra-strong, heat-treated screws on hand for your customers and yourself. We’ve put together the ...

Product Description

Convenient 12 Paks Of The Most Useable Sizes For Scope Mounting Applications

Refill your Leupold factory screw kit or keep these extra-strong, heat-treated screws on hand for your customers and yourself. We’ve put together the most requested screw sizes in money-saving 12 Paks so it’s easier to ­convert existing rings and bases to Torx head without having to buy more than you need. These are the same screws used by ­Leupold but will fit many other brands of rings and bases.


Big Book Catalog, Issue:71, Page:378

SPECS: Steel, blue (BL) or stainless steel (SS), bright finish. 12 screws per pak. All lengths listed are nominal shank length.

Standard Boresighter Bushnell.

$78.99
Optical collimators save you time and ammunition by getting your rifle or handgun “on paper” without firing a shot. Gives hunters, target ...

Product Description

Fast, Accurate Sight-In System Gets "On Paper" Without Firing A Shot

Optical collimators save you time and ammunition by getting your rifle or handgun “on paper” without firing a shot. Gives hunters, target shooters, and gunsmiths the convenience of initial sighting-in of scopes and sights at home or in the shop. Easy-to-use: attach collimator to the muzzle, then adjust the windage and elevation of the scope or iron sights until they align with the collimator grid. Sights centered on the grid will shoot very close to point-of-aim at 100 yards. Collimator is CNC-machined from aluminum, then hardcoat anodized to protect the finish from nicks, dings, and surface wear. Includes convenient carrying case that protects from damage and keeps each item clean and ready to use. Standard model features 15 steel arbors that fit bores ranging from .177 to .50 caliber, including popular metric calibers, to provide precise alignment with the collimator for extremely accurate sight adjustment. Roll-up storage case easily fits in your range bag or tool box.


Big Book Catalog, Issue:71, Page:460

SPECS: Collimator - Aluminum, hardcoat anodized finish, matte black. Standard contains (1) insert of each caliber: .177, .22, .25, .27, 6mm, 6.5mm, 7mm, .30, .32, .338, .35, .375, .44, .45, .50 . Collimator - 4¾" (12cm) long. Inserts - Steel, 3¾" (9.5cm) long. Case - Vinyl, black. 3¼" (8.2cm) diameter x 5½" (14cm) wide, rolled up.

0 comments
post a comment