Aluma-Hyde® Ii Brownells
Search for Aluma-Hyde® Ii Brownells Ads Immediately . Free shipping and returns on "Aluma-Hyde® Ii Brownells Online Wholesale" for you buy it today !. Find more Best Low Price and More Promotion for Aluma-Hyde® Ii Brownells Online Check Price This is Aluma-Hyde® Ii Brownells Sale Brand New for your favorite.Here there are reasonable item products details. One more selection for your internet shopping. Thanks to everyone who came to check out us to view our products.
Aluma-Hyde® Ii Brownells.
Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents
The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Parkerizing Gray (medium dark), Stainless Steel Gray (light), Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown) and the original favorite, Matte Black. Also available is Semi-Gloss Black which can be used to compliment the matte finishes or give you a black finish that is less matte if you desire. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock-around “truck” guns and, of course, anodized parts.
Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here’s the way we apply it: Warm the part and the Aluma-Hyde II to about 90? F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don’t wait more than thirty minutes. Once Aluma-Hyde II starts curing, you must wait until it’s fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90? F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.
Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product.
1911, Issue:04, Page:062
AR-15, Issue:04, Page:077
Big Book Catalog, Issue:71, Page:400
SPECS: 12 oz. (340 g) aerosol can.
Ar-15 Cqb Starter Kit Upper Receivers 5.56 Picatinny Lewis Machine & Tool.
Outfit Your Kit with a Kiwi-Ready Carbine
While the New Zealand military might not be anyone's first thought when it comes to emulating a country's military-issue arm, there's no question that the Kiwis have a unique battle rifle that's worth replicating. The Lewis Machine & Tool CQB Starter Kit will get users on their way to having a unique AR-15 that rounds out their military collection.
Each Lewis Machine & Tool CQB Starter Kit includes a monolithic upper receiver that is compatible with any standard mil-spec lower receiver. The kits include a chrome-lined barrel in a New Zealand profile, which is surrounded by a Picatinny-railed, carbine-length handguard.
- Chambered in 5.56 NATO
- Twist rate: 1:7 inches
- Does not include charging handle or bolt-carrier group
- Matte-black finish
Another unique feature in the Lewis Machine & Tool CQB Starter Kit are the MRP quick-change barrel set-up, and the kits can be had in three different barrel configurations, two 16-inch options and one 10.5-inch model.
Ar-15 30rd Pmag Gen M2 Moe Magazine 223/5.56 Magpul.
Dependable & Nearly Indestructible; Store Fully Loaded Without Loss Of Reliability
Exceptionally rugged, combat- and competition-ready magazine functions flawlessly, even when left fully loaded for extended periods. Corrosion-proof, self-lubricating one-piece body of fiber-reinforced, molded polymer has no spot welds or joints to impair the follower, and the constant internal curve ensures smooth, unobstructed movement of the round stack. Anti-tilt follower stabilizes the stack to help prevent nose-diving and bolt-over-head failures. Heat-treated, stainless steel spring is stress-relieved for optimal performance. Withstands the heat from prolonged full-auto fire and is not harmed by most bore cleaners and solvents. Exterior ribbing provides added gripping surface; magazine catch notch, rather than a traditional hole, keeps dirt and debris out. Easy-to-grasp ledge on floorplate aids in extracting magazine from pouches; floorplate removes easily for cleaning. All models available in Black. DO NOT COME WITH DUST COVERS.
AR-15, Issue:11, Page:060
Big Book Catalog, Issue:71, Page:067
SPECS: Molded polymer, stainless steel spring. 30-round capacity. Available in Black.
10/22® Bx-Trigger Ruger.
The 10/22® BX-Trigger™ features a light, crisp 2.5-3.0 lb trigger pull, with minimal over travel. Rugged, reliable and safe (meets or exceeds industry standards for drop testing), this new and improved Genuine Ruger® Factory Accessory comes in a completely self-contained module and is easy to install. The BX-Trigger™ features a Polymer construction and drop-in installation. Fits Ruger® 10/22® rifles or 22 Charger Pistol.
DO NOT DRY FIRE UNLESS A HAMMER BLOCK IN INSTALLED OR TRIGGER IS INSTALLED IN A RUGER® 10/22® RIFLE.
Big Book Catalog, Issue:71, Page:154
Agent Night Sight Set For Glock® Ameriglo.
Duty/Carry Sights for Operation in Any Light Conditions
AmeriGlo’s Agent night sight set for Glock® is a major step forward in night sight design that delivers improved visibility and faster sight acquisition in any lighting conditions. These are low-profile, fixed sights designed to meet the daily carry needs of law enforcement officers. In fact, Agent sights were recently selected by a large federal law enforcement agency as its carry sight of choice.
AmeriGlo Agent sights for Glock® employ the proven 3-dot configuration preferred by many experienced shooters. The ProGlo style front blade has a vivid green Tritium lamp surrounded by a bright orange outline, so there’s no trouble identifying your front sight under stress. The fixed rear sight has a rounded U-notch flanked by two green Tritium lamps with subdued black outlines.
- Drop-in replacements for factory sights
- Swiss-made self-illuminating Tritium lamps are backed by a 12-year warranty
- Rear U-notch (all): .165" wide
- Front sights: .140" wide (G42,43 is .125" Wide)
- Glock® 9mm/.40 S&W/.357 SIG front: .180" high
- Glock® 10mm/.45 ACP front: .165" high
- Glock® 42/43 front: .190" high
- Gen5 sights fit all models of Glock Gen5 pistols ONLY (front: .200" high)
AmeriGlo Agent night sights are machined from high-grade steel barstock, dehorned to prevent snagging on your clothing during the draw, and given a durable, non-reflective black finish to match your Glock’s slide. Even so, the rear sight body is shaped to support one-handed slide racking in an emergency.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Big Book Catalog, Issue:71, Page:316
Rmr Cut Slide For Gen3 Glock® 9mm Brownells.
Stainless Steel Slide With a Bundle of Custom Features
Brownells Front Cut RMR Slides for Glock® pistols feature a distinctive, wraparound serration pattern that aids in manipulating the slide, especially when checking the chamber. (OK, we’ll admit it: the serrations look cool, too.) They also come with a pre-cut slot for easy, secure, low-profile mounting of a Trijicon RMR sight. All slides equipped with standard Glock sight cuts for front and rear sights of your choice. If the RMR is in place, suppressor height sights are required.
In addition, you can get your Front Cut RMR Slide with an optional "window" cutout on top between the front serrations that reduces weight and enhances airflow to keep the barrel cooler - ideal for hard-working action competition pistols.
Each Front Cut RMR Slide starts life as a billet of 17-4 stainless steel that is machined to Glock® factory specifications inside, so it’ll fit factory frames and accept factory or aftermarket barrels and parts.
- Fits Gen3 Glock® 17 and 19 pistols & components
- Available with distinctive top window cutout or traditional solid top
- Machined from corrosion-resistant 17-4 stainless steel billet
- Heat Treated to 41-44 on the Rockwell C scale
- Given a wear-resistant matte black Nitride finish
- Pre-cut Trijicon RMR mounting slot, plus factory front/rear sight cuts
A Brownells Front Cut RMR Slide is the ideal upgrade for your factory Glock 17 or 19 pistol - and the perfect top half for a new custom gun built on an 80% frame.
Channel liner required for these slides. Channel liners are a press fit and require a tool to install.
Big Book Catalog, Issue:71, Page:214