Ar-15 Tactical Trigger Group Cmc
If you find product , Deals.If at the time will discount more Savings So you already decide you want have Ar-15 Tactical Trigger Group Cmc for your, but you don't know where to get the best price for this Ar-15 Tactical Trigger Group Cmc . We already done the research and spend a lot of time for you. Ar-15 Tactical Trigger Group Cmc to find out where to get the best deal on Ar-15 Tactical Trigger Group Cmc.
Ar-15 Tactical Trigger Group Cmc.
Drop-In Trigger Module Is Factory Tuned For A Super Smooth, Clean-Breaking Pull
CMC’s self-contained, drop-in trigger module replaces the heavy factory trigger found in many commercial AR-15s and delivers a crisp, clean pull with a consistent, pre-set pull weight. Originally designed by competition shooter Chip McCormick to provide all the advantages of a fine, match-grade, single-stage trigger without having to fit and adjust multiple components.
A rigid, steel, trigger housing holds all the factory-tuned internal components in proper alignment for easy, fast installation. Generous, precision-ground sear/hammer engagement surfaces provide a remarkably clean, crisp release while preserving reliable function. Each trigger assembly is tweaked at the factory to minimize take-up and over-travel. Threaded sleeves provide ultra-smooth pivot surfaces for the hammer and trigger.
Two, slightly oversized center pins replace the standard, trigger/hammer pins to save wear, reduce friction, and prevent trigger wobble; "Chicago"-style screws prevent pin walk.
CMC single-stage AR-15 triggers are available with traditional Curved trigger shoe, or skeletonized Flat shoe that provides a different feel some shooters prefer and gives your AR a distinctive look.
Two-stage models also available - see separate listing.
AR-15, Issue:11, Page:027
Big Book Catalog, Issue:71, Page:028
Sinclair, Issue:5B, Page:254
SPECS: Hammer/Trigger - Steel, blued finish. Housing - Steel, in-the-white. Fixed pull weight is not user-adjustable. Includes two (2) Chicago-style center pins. Fits AR-15 (or AR-308 that uses AR-15 trigger) with .154" diameter trigger and hammer pins.
Easy-To-Use, Positive Release Agent For All "Acra" Products (The One We Use!!)
According to famed stockmaker Bill McGuire of Wenatchee, Wash., "I can honestly say it (ACRA-RELEASE™) is the best and cleanest release I have ever used". Specially formulated to apply easily, yet gives sure, positive release for all "Acra" products in all types of bedding under varying conditions. (You still have to cover all surfaces with it!!) Ideal for irregular shapes. Cuts cleanup time. Recoats missed areas easily. Will not affect fit/tolerances. Clear, but stays "oily" so you can both see and feel the coverage. Wipes off metal and cured epoxy with 1,1,1 Trichloroethane. Works great with all our epoxies: Acraglas ®, Acraglas Gel®, Steel Bed™, Acra-Weld™, ACRA-QUICK™, and most others!
Cannot ship outside Continental United States. Ship UPS Ground only within U.S.
Big Book Catalog, Issue:71, Page:416
SPECS: 16 fl. oz. (473ml) Aerosol.
M&p380 Shield Ez 2.0 No Thumb Safety Smith & Wesson.
Easy-To-Operate Compact EDC Pistol That's Also Built for Safety
A compact, everyday-carry variation of Smith & Wesson’s popular M&P pistol line, the M&P380 Shield EZ was designed with ease of use in mind, especially for new and inexperienced shooters.
Compact pistols chambered in .380 ACP are typically blowback operated, which requires a stiff recoil spring that is hard for shooters with limited hand strength to operate. The M&P380 Shield EZ needs significantly less force than similar pistols to rack the slide. Deep serrations as the rear of the slide provide an excellent gripping surface for racking. Aggressive texturing on the grip firmly anchors the pistol in the shooter’s hand - a big help not just in racking the slide but in controlling recoil, too. Plus, the 18° grip angle offers a natural point of aim.
Unusually refined for a compact carry pistol, the M&P380 Shield EZ’s single action trigger has a crisp break and a distinct reset you can both feel and hear, giving the shooter better feedback and precise trigger control. Unlike the rest of the M&P line, the EZ’s trigger face does not have a built-in passive safety; there’s a grip safety instead.
- Thin & lightweight - easy to carry all day
- Easy-to-rack slide
- Easy-to-acquire, 3 white dot sights with windage adjustable rear
- Picatinny under-frame rail - easy to mount a light or laser sight
- Easy-to-load 8-round magazine
- Easy to disassemble for cleaning
- Visual / tactile loaded chamber indicator
- Reversible magazine release button
Like all M2.0 M&P's, the EZ has Smith & Wesson's new takedown lever design that lets you disassemble the pistol without having to depress the trigger for an extra measure of safety. This model does not have a thumb safety, but for an added layer of protection an ambidextrous thumb-safety model is also available (#940-001-100, listed separately).
Ar-15/m16 Asap Sling Adapter Magpul.
Gives Operator A Major Tactical Advantage With 180 Degrees Of Unrestricted Sling Movement
Ambidextrous Sling Attachment Point helps the operator adapt quickly to changing tactical situations by allowing rapid switching of weapon from one shoulder to the other. An unrestricted 180° of sling movement lets you change shoulders to take maximum advantage of available cover, address targets around corners or other barriers, or shift weapon position if one arm is injured. Works with any single-point sling that attaches with a quick-release snap-hook, and fits any rifle or carbine with an M4-type collapsible buttstock. Simply remove the factory receiver end plate and replace with the ASAP; requires no other alterations to weapon, so you can continue to use your original receiver extension, buttstock, and sling. Heavy duty cast steel construction with a 1/8" thick link ring, protected by a durable, wear- and corrosion-resistant mil-spec black manganese phosphate Parkerized finish. Fits both Commercial and Mil-Spec receiver extensions.
AR-15, Issue:11, Page:072
Big Book Catalog, Issue:71, Page:077
Sinclair, Issue:4X, Page:005
SPECS: Steel, Parkerized, matte black. Fits both mil-spec and commercial/universal M4-type receiver extensions.
Remington 870/mossberg 500 Telescoping Buttstock Kit Mesa Tactical Products, Inc..
Gives A Tactical Shotgun M4 Carbine Handling; Optional Recoil Reduction System
Bolt-on replacement stock gives your Remington 870 the control and adaptability of a collapsible M4 carbine stock. Telescoping, five position buttstock allows fast length-of-pull adjustment to adapt to body armor and heavy tactical clothing. Aluminum receiver adapter bolts to rear of receiver with included mounting hardware and requires no permanent alterations to your gun. Accepts the included M4 SOPMOD buttstock or any aftermarket stock that fits a mil-spec (1.14" O.D.) buffer tube. Hogue overmolded rubber pistol grip with palm swells and finger grooves bolts solidly to the receiver adapter to reduce recoil shock and give the shooter better control. Basic LEO (Law Enforcement) model positions the buttstock low enough to allow use of the original shotgun bead or iron sights. Four-position stock offers length of pull adjust from 10½" to 13½". Includes one push-button sling swivel that fits sockets on either side of the receiver adapter. Recoil Reducing model combines the low tube position and M4 buttstock with an Enidine hydraulic energy absorber to reduce felt recoil by as much as 70%. Gives you oustanding control to ensure fast, accurate follow-up shots. L.O.P. adjusts from 11½" to 14½" in five, pre-set, locking positions. Includes one push-button swivel that fits sockets on either side of the receiver adapter.Available for the Remington 870 and Mossberg 500.
Stock adapter available individually. Adapter accepts standard AR-15 grips and carbine receiver extensions.
Big Book Catalog, Issue:71, Page:210
SPECS: Receiver Adapter & Extension Tube – A-356 T6 aluminum, hardcoat anodized, dark gray, matte finish. Enidine Absorber – Aluminum housing, anodized, black; steel internal components. Buttstock – Molded polymer, matte black. Pistol Grip – Fiberglass core overmolded with soft rubber. All kits fit Remington 870 shotguns in 12 gauge only. Mounting hardware and installation instructions included.
1911 Mainspring Housing W/ Magwell Smith & Alexander.
Extra-Wide For Faster Reloads
Drop-in, one-piece mag well and mainspring housing makes the mag well opening 100% bigger for easier magazine insertion and faster, “can’t-miss” mag changes. Increases grip length by ¼" for additional leverage and greater recoil control. For a no-slip, no-shift grip, mainspring housing features extra-defined, 20 lpi checkering, unless otherwise noted. Smooth models have uncheckered mainspring housing. Grooved model has full-length vertical grooves on the mainspring housing.
1911, Issue:11, Page:023
Big Book Catalog, Issue:71, Page:118
Sinclair, Issue:1A, Page:022
SPECS: Steel. Available blued (BL) or stainless steel (SS) with flat (FL) or arched (AR) mainspring housing to fit: 1911 Govt./Commander (GM); Officers Model (OM); Para-Ordnance P-14/P-16 (PO). Instructions included.