Ar-15 Kak Shockwave Blade Pistol Brace Kak Industry Llc.
Ar-15 Kak Shockwave Blade Pistol Brace Kak Industry Llc..
Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.
- Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
- Available in Black, Flat Dark Earth, OD Green and Grey
- Quick and easy to install
- Provides additional support during firing
- Weighs a scant 5.0 ounces
- ATF approved for pistol use
- Veteran designed, engineered, marketed, and sold
- Made in U.S.A.
Ar-15 Drop-In Echo Trigger Fostech Outdoors, Llc..
The Echo AR-II Trigger is an ATF approved trigger that allows for fast follow up shots for great fun at the range.
The Echo AR-II Trigger allows the shooter to select from 3 different settings:
- Safe Mode: Firearm will not fire.
- Semi-Automatic Mode: Firearm fires when trigger is pulled.
- Echo Mode: Firearm fires when trigger is pulled and also when trigger is released.
The Echo AR-II Trigger is designed with safety being the utmost priority. When the shooter is in the Echo Mode and depresses the trigger one round is fired, if the target moves, the shooter can move the selector to the safe position and a second round will not fire upon release.
- PATENTED Design that gained ATF Approval (Patent # US 8,820,211 B1)
- Technology licensed through HIPERFIRE inside the Echo Trigger
- Light, clean, and crisp pull in Semi-Automatic Mode
- The Echo AR-II Trigger is packed full of cutting edge technology
- Reliable function in Echo Mode
- You will need a full auto bolt carrier in your firearm for the Echo AR-II to function
The Echo AR-II Trigger is for many of the AR-15 platforms but not all. The Echo AR-II Trigger NO LONGER comes with a stripped carrier with gas key. Customers made it very clear that they did not want to deal with a proprietary carrier. FosTecH's team of engineers developed the Echo AR-II so that it did not need that proprietary carrier.
Handgun Ammo 45 Acp 230gr Handgun Sellier & Bellot.
Full Metal Jacket projectiles are the ideal choice for recreational target shooting and training. When you want great value without sacrificing quality and performance, you can rely on Sellier & Bellot full metal jacket ammunition to deliver results.
You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition. All ammunition must be shipped Domestic Ground. Shipping not available for International residents. Residents in CA, DC, DE, IL, MA, NY, CT, NJ and OH may have additional restrictions. Always make sure you use the correct ammunition for your firearms. Check your state and local laws for any other applicable firearms and ammunition regulations. Due to Department of Transportation regulations, we cannot accept returns on ammo. Please check local laws before ordering. View full restrictions here.
Ammunition pricing is per box. ATTENTION – California Customers
Brownells is still shipping ammunition orders to California but the process has changed to comply with California Proposition 63. We must now ship ammunition purchased online to an FFL or California-approved ammunition dealer. After placing your order, a Brownells representative will contact you to ensure your ammunition arrives quickly and in compliance with the law.
Remington 700/40x & Win M70 Rifle Triggers Jewell Triggers, Inc..
Fully Adjustable, Finest Quality For A Light, Reliable Trigger Pull
Self-contained replacement trigger module provides outstanding reliability, function, and performance for benchrest, varminting, and other types of precision shooting. All internal components are CNC machined from stainless steel, then heat-treated to Rc 58 for extended service life. Adjustment screws are fitted with a nylon insert to maintain your trigger settings without using thread locking compounds. Single-stage design is three-way externally adjustable, eliminating the need to remove the barreled action from the stock to set pull weight, let-off, or overtravel. Remington Hunter Varmint Rifle (RHVR) includes top lever safety and bottom bolt release. Fits Remington 700/40x rifles, right-hand actions only. Remington Bench Rest (BR) is designed exclusively for match shooting, and includes no safety or bolt release.Fits Remington 700/40x rifles, right-hand and left-hand actions. Winchester Hunter Varmint Rifle (WHVR) fits both Pre- and Post ‘64 Winchester M70 rifles, right- and left-hand actions which were manufactured in New Haven CT. It WILL NOT fit the MOA trigger group rifles made since 2008. Uses existing safety.
Big Book Catalog, Issue:71, Page:165
Sinclair, Issue:5B, Page:256
SPECS: Internal Components - 440 stainless steel, hardened to Rc 58. Housing - 300 Series stainless steel sheet, .050” (1.2mm) thick. HVR - 1.5 oz. to 48 oz. pull weight, fits right-hand rifles only. BR - 1.5 oz. to 3 oz. pull weight, fits right- or left-hand rifles. WHVR - 1.5 oz. to 48 oz. pull weight, fits both right- and left-hand actions. Installation instructions included.
Sig P226 Threaded Barrel 9mm 1/2x28 Silencerco.
A SIG P226 Is Nice, But a P226 That Can Take a Suppressor Is Better!
SilencerCo’s SIG P226 threaded replacement barrel is just what the doctor ordered to convert your P226 to suppressed fire. Ready to drop into your pistol and sporting ½"-28 muzzle threads, this replacement barrel accepts most of the popular sound suppressors commonly installed on the SIG P226.
- Fits 9x19mm-chambered SIG P226 with 4.5" barrel
- Machined from 416R stainless steel with a tough, non-reflective black nitride finish
- 1-10" RH rifling
- ½"-28 threads
Machined to factory specs for easy fit to your pistol, SilencerCo’s SIG P226 threaded replacement barrel makes it easy to upgrade to suppressed fire without sacrificing the superb reliability and accuracy of your SIG.
Big Book Catalog, Issue:71, Page:220
Remington Pro 700 Sa Chassis Adjustable Magpul.
Completely Adjustable Rifle Chassis
Magpul’s Pro 700 Rifle Chassis combines innovative engineering and precision machining to create a full featured precision rifle chassis for Remington 700 actions. Based on a full billet 6061-T6 aluminum skeleton, the Magpul Pro 700 Rifle Chassis is clad in Magpul polymer for comfort, noise mitigation, and ergonomics. With the swap of a bolt-cutout plate, a reversible cheek riser, and reversible hinge, the chassis is fully ambidextrous, ensuring that left handed shooters are included in the fun!
The Pro 700 Rifle Chassis features an injection molded polymer grip with 5-degree forward edge sweep and enlarged palm swell with 7-degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench. Users can adjust the comb height to 1” with a secondary locking knob, eliminating movement to the cheek riser. An Integrated AICS pattern magazine made of reinforced polymer is included and optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines.
- Reversible, durable push-button hinge to fold the stock
- Overall LOP adjustment range: 13.25”-15.125”
- Butt pad height adjustment: .90”–1.33”, adjustable 5 degrees left or right
- Cheek riser: 3-position fore/aft adjustment of +.375”, 0” and -.375”; left- or right-handed adjustable
- Durable cast steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
- M-LOK slots available for accessory mounting
- The magazine release is melonite treated steel that is low-profile and ambidextrous
A large trigger guard found on the Pro 700 accepts most factory and aftermarket curved or flat triggers, and can be used with gloves. A melonite treated steel magazine release is low-profile and ambidextrous.
The Magpul Remington 700 Pro Chassis fits up to an MTU barrel contour and is available in black, flat dark earth, and od green. The Remington 700 Pro Chassis would be a great upgrade to an existing gun, or for your next build!
Big Book Catalog, Issue:71, Page:186